Where two or more properties require heating, for example in a building development or block of flats, instead of heating each one individually, a more cost-effective option may be to provide a District Heating Scheme.
District heating can utilise a number of different technologies, depending on the situation, including Ground Source Heat Pumps, Combined Heat, and Power (CHP), Commercial Wood Chip Biomass, or Natural Gas Boilers.
Get a Quote
District Heating in Flats or Apartments
District Heating offers a number of advantages over installing individual heating systems. For example, in blocks of flats or apartments, installing individual gas boilers in each flat means running gas supplies to each property.
In addition, each boiler will also need a flue, meaning the boiler will have to be installed on an outside wall and away from opening windows in order to comply with building regulations.
District heating systems use Boilers (Biomass, such as Woodchip, or Gas or Oil) or Heat Pumps (Ground Source or Air Source) that are located remotely to the flats, in a central boiler house or plant room.
The hot water produced from the plant room is piped, in insulated pipework, to a Heat Interface Unit [HIU] in each property. The HIU acts like a Combination Boiler. It is fitted with heat exchangers that transfer heat into the property for space heating or Domestic Hot Water and can be fitted with a metering system that allows the property to be invoiced for the heat they use.
With our extensive experience, we can provide a heating solution for most developments, whether they are new build or renovations
If you have any more enquiries about our Commercial Heating installation services and whether we can help you, then call us on 01777 228 076 or email email@example.com.
Stiebel Eltron Air Source Heat Pump
New System: Stiebel Eltron WPL25AS Air Source Heat Pump, hot water cylinder and under floor heating.
Kensa 3kW Shoebox Ground Source Heat Pump
New System: Kensa Shoebox 3kW ground source heat pump.
Froling PE1 Wood Pellet Boiler
New System: Froling PE1 – 20kW Wood Pellet Biomass Boiler.
“They fitted our boiler system .. Was punctual polite and efficient ..We use them to service yearly and wouldnt use anyone else. Definitely 5 star.”
“Had BAR come and install new pressurised system to update an old hot water system. The guys did a great job and ensured everything was done quickly and with minimal disruption and mess. Thanks!”
Once again please pass on our thanks to the whole team for all their work during the installation of the hot water/heating system. The whole process from start to finish has been carried out by professional and caring people who have been a pleasure to work with.