Biomass Heating

Is Biomass Heating right for you?

If you have access to a supply of sustainable wood fuel, biomass heating could save you a significant amount of money over a year compared to Electricity, Oil or LPG.

Get a Quote For Your Plumbing, Heating or Electrics

What is Biomass Heating?

Biomass heating systems burn wood fuel, such as chips, pellets or logs to provide warmth in a single room or to power central heating and hot water boilers. Biomass boilers can vary in output, from around 8kW, up to megawatt sized energy plants. Because of this biomass can be suitable for any sized application, with a single boiler or multi-boiler plant room heating a single small dwelling up to an apartment block or entire village.

Depending on the size, domestic biomass boilers can be installed in outbuildings or boiler rooms, in much the same way as an oil boiler. There are however, biomass boilers that are suitable for installing within your property, including decorative models that have the appearance of traditional stoves.

A biomass boiler would normally be connected to a buffer tank, which the boiler would heat. Your property would draw from the heat stored in the buffer tank, instead of directly from the boiler. This allows the boiler to run for a longer period of time, while the tank is heated, instead of having to ignite every time there is a demand for heat from the property. This greatly increases efficiency and reduces fuel usage and maintenance costs.

Domestic biomass heating is a great alternative to oil or LPG boilers for properties that are “off grid”, with log and chip boilers being especially well suited to householders who have access to a sustainable fuel supply.

If you would like to discuss which option is best for you, contact us today.

Wood Chip

Wood chips, can by their nature, vary in quality and suitability for use in biomass boilers. For this reason, there are specific standards that define the characteristics of wood chips produced for biomass. These normative specifications define the size of the wood chip:

  • P16 Specification, < 1% > 45mm, (maximum chip length 85mm)
  • P45 Specification, < 1% > 63mm
  • P63 Specification, < 1% > 100mm

 And moisture content:

  • M20 < 20% moisture
  • M25 < 25% moisture
  • M30 < 30% moisture
  • M40 < 40% moisture
  • M55 < 55% moisture
  • M65 < 65% moisture

 Informative specifications for wood chip include:

  • Net energy content, typically in MJ/Kg or kWh/m3
  • Bulk density, in kg/m3

biomass-wood-chip

Wood Pellet

Wood pellets have been one of the most common forms of biomass fuel used in biomass boilers. They are cylindrical in shape and made from compressed sawdust, which is often the waste product from the timber industry (e.g. sawmills). Their specification is strictly defined to ensure consistent quality. Biomass fuel has to meet CEN/TC 355 standard Wood pellets for biomass must be;

  • Less than 10% moisture
  • Be 6mm in diameter and less than 30mm long (20% can be up to 45mm)
  • Have a bulk weight of 650kg / m3
  • Ash content, max. 0.5%
  • Dust content, max 2.3%
  • Energy content, 49 kilowatts/kg

Wood pellets are fused by the natural lignin present in dry wood. It strengthens the wood as well as having waterproofing properties. The very low moisture content helps consistent combustion efficiency, as, during the burning of fuel, any water content must be evaporated before combustion can occur. This process requires energy, and therefore reduces overall system efficiency. Pellets are additionally very dense. Both these qualities make them a good source of energy.

biomass-wood-logs

Wood Logs

Wood logs are probably the least common form of biomass fuel and have a more limited application. Typically, the largest log boilers have outputs of around 60kw, so are suitable for domestic or smaller commercial installations. They require greater user input as they require regular filling, however, if you have access to an approved, sustainable source of seasoned logs, they can be a very cheap way to heat a property. Additionally, combination log and pellet boilers are available which run on wood pellets if there is an interruption in the supply of logs and use wood pellets to light the boiler automatically.

Log boilers work by a process known as wood gasification, whereby wood gas is produced from the logs as they are heated in the boilers firebox and then burned at high efficiency with minimal ash production or flue emissions.

The Four Processes of Gasification

Commercial Plumbing and Heating

Key steps when having Biomass Heating Installed

When installing a biomass heating system, it is important to ensure that the proposed system meets all the client’s requirements and the heating requirements of the property, especially when installing a system to replace an oil boiler. This is why it’s important to use an experienced MCS accredited installer, such as B.A.R & Sons. To make sure of a system that perfectly matches your home and your heating and hot water needs, a we will work to three key stages:

1. Pre-design Assessment

This stage is to determine which heating system will best suit your property and the feasibility of your preferred system. With years of experience in the renewable heating industry, B.A.R & Sons will be able to advise you on the most beneficial system for you. If choosing a Biomass Boiler, we will be able to advise you on the best location for all the associated equipment; this is especially important if choosing a woodchip or pellet boiler, as you require enough room for the fuel bunker. We can produce a budgetary estimate, detailing the work required and including different options, where applicable.

2. Detailed Design

Should a Biomass Boiler prove to be the most advantageous system for you, we will begin the detailed design process. This will include identifying a suitable location for the boiler and other plant equipment, including the fuel bunker, a full heat loss survey to determine the heating and domestic hot water requirements of your property and a heat emitter design to ensure the heat is transferred efficiently into your property. All of this information will be included in our full quotation, along with a performance report detailing the estimated energy savings and Renewable Heat Incentive payments that you could receive.

3. Installation

Our team of qualified engineers, led by one or both of our directors will be onsite to carry out the installation. All work will be completed in house, including the fitting out of the plant room, fabrication of the fuel bunker and fuel feed system, installation of the buffer tank, and connection into the pre-existing heating system, if required. We can also complete the installation of the underfloor heating and or radiators, depending on which is selected, connection of the heating controls, and final commissioning of the system. Upon completion, you will be provided with a full handover pack and we can even assist in the application for the RHI.

Latest Projects

Stiebel Eltron Air Source Heat Pump

New System: Stiebel Eltron WPL25AS Air Source Heat Pump, hot water cylinder and under floor heating.

Kensa 3kW Shoebox Ground Source Heat Pump

New System: Kensa Shoebox 3kW ground source heat pump.

Froling PE1 Wood Pellet Boiler

New System: Froling PE1 – 20kW Wood Pellet Biomass Boiler.

Client Testimonials

“They fitted our boiler system .. Was punctual polite and efficient ..We use them to service yearly and wouldnt use anyone else. Definitely 5 star.”

Shani Hanson

“Had BAR come and install new pressurised system to update an old hot water system. The guys did a great job and ensured everything was done quickly and with minimal disruption and mess. Thanks!”

Daniel Griffin

Once again please pass on our thanks to the whole team for all their work during the installation of the hot water/heating system. The whole process from start to finish has been carried out by professional and caring people who have been a pleasure to work with.

Mr & Mrs Garner

Contact Us

Unit 10, Ebor Court, East Retford, DN22 7WF

01777 228076

enquiries@barandsons.co.uk